36V 13mm Hammer Drill Skin DV36DC(H4Z)

Whether you’re taking on a big job or tightening or loosening screws, the HiKOKI 36V Brushless Impact Driver Drill DV36DC will help you get the job done faster and easier! Featuring Reactive Force Control (RFC), durable design resistant to heat generation and side handle that can be mounted in 11 different positions.

• RFC (Reactive Force Control) – When the gyroscope sensor built in the controller detects a predetermined angle, the motor stops automatically to prevent excessive jerking of the tool
• LED Light warning signals occur with RFC and when the tool is overburdened or overheats
• Due to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work
• The side handle can be mounted in 11 different positions to improve workability
• Compatible with the HiKOKI MultiVolt battery (sold separately)

Specifications

• Switch type: Trigger
• Drill chuck type: Keyless metal chuck
• Chuck capacity: 1.5-13mm
• Light: LED White
• Clutch stages: 22 (Torque 1.5 -8.0Nm)
• Maximum Torque Hard Joint: 155Nm
• Maximum Torque Soft Joint: 100Nm
• No load speed – low: 0-550rpm
• No load speed – high: 0-2200rpm
• Capacity:
  • Brick & Masonary: 22mm
  • Steel & Aluminium: 20mm
  • Wood hole saw: 118mm
  • Wood self feed bit: 95mm
  • Small screw: M6
  • Wood screw: M16 x 100mm
• RFC (Reactive Force Control): Yes
• Forward / Reverse Mode: Yes

*Battery and charger not included.